Filter
Top Products
Self-Priming
Transfer Pumps
Table of Contents
Descripion . . . . . . . . . . . . . . . . . . . . . . .1
Unpacking . . . . . . . . . . . . . . . . . . . . . . .1
Safety Guidelines . . . . . . . . . . . . . . . . .
1
General Safety Information . . . . . . . . .
1
Installation. . . . . . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . . . . . .2
Maintenance . . . . . . . . . . . . . . . . . . . . .3
Troubleshooting Chart
. . . . . . . . . . . . .4
Replacement Part Information
. . . . 6-7
Warranty . . . . . . . . . . . . . . . . . . . . . . . .8
Description
These self-priming transfer pumps are
designed to easily transfer water from
one point to another. Model PC1, 12
Volt Transfer Pump is convenient when
normal power is not readily available.
Typical applications include removing
water from pool covers, clogged
drains, stock tanks, water basins, boats,
cisterns, etc. Model PC2, 115 Volt
Transfer Pump is great for household
usage. Typical applications include
removing water from waterbeds,
clogged sinks, basements, etc. Note: Do
NOT use PC2 in pool areas. The motors
on both models PC1 and PC2 are non-
submersible.
General Safety Information
CALIFORNIA PROPOSITION 65
This product or
its power cord may
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
GENERAL SAFETY
Do not submerge
motor or allow
motor to be exposed to water. Personal
injury and/or death could result. Keep
pump and power cords away from
liquids. Model PC1 becomes very hot
during operation.
Do not pump gasoline or
other explosive liquids. Do
not operate pump where
flammable or explosive fumes or gases
are present as a fire or explosion could
result. Pump should only be used to
pump clear water. Do not run pump
dry.
1. Read all instructions
before operation.
2. Protect electrical cord
from sharp objects, hot
surfaces, oil and chemicals. Avoid
kinking the cord and replace
damaged cords immediately.
This pump has been
evaluated for use
with water only.
Unpacking
Inspect this unit before it is used.
Occasionally, products are damaged
during shipment. If the pump or
components are damaged, return
the unit to the place of purchase for
replacement. Failure to do so could
result in serious injury or death.
READ & FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
DO NOT DISCARD
Safety Guidelines
This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger indicates an
imminently
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
Warning indicates a
potentially
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
NOTE: Information that requires special
attention.
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
For parts, product & service information
visit www.waynepumps.com
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
321205-001 11/08
Operating Instructions & Parts Manual PC1 and PC2 Series
© 2008 Wayne Water Systems
MANUAL