Watlow Electric Heater/Fan Fan User Manual


 
Ideal For Heating
Liquids, Gases,
Tanks and Pressure
Vessels Requiring
Higher Kilowatts
Watlow flange heaters are easy to install and maintain.
Designed for heating liquids and gases in tanks and pressure
vessels, flange immersion heaters are ideal for applications
requiring higher kilowatt output.
Watlow flange heaters are made with WATROD or
FIREBAR
®
tubular elements brazed or welded to a flange.
Stock flange heaters are equipped with a general purpose
(NEMA 1) terminal enclosure.
Flange heaters, with FIREBAR elements, also answer the
need for liquid immersion applications requiring high kilowatt
output in small tanks. The FIREBAR element's unique flat
surface geometry packs more power in a smaller bundle, with
lower watt density, making it especially well suited for
petroleum-based liquid heating applications.
FLANGE IMMERSION HEATERS
Features
ANSI and ANSI compatible 2,
2
1
2, 3, 4, 5, 6, 8, 10, 12 and
14 inch flanges
Flange sizes up to 24 inches
available on Made-to-Order
units
Element sheath and flange
materials available to meet
application needs
Integral thermowells
A standard, general purpose
(NEMA 1) terminal enclosure
Element support(s)
Drilled and tapped holes
supplied for eye bolts on 10
inch and larger flange heaters
All units are inspected and/or
tested
4 to 6 inch FIREBAR flange
heaters
Repressed (recompacted)
WATROD hairpins
Branch circuits meet NEC
requirements for 48 amps per
circuit maximum
•UL
®
and CSA component
recognition; under files #E52951
and 31388 respectively
Benefits
Provide appropriate heater
size-to-application and fit
Fits a wide range of industrial
needs
Compatible with media being
heated
Provide convenient temperature
sensor insertion and
replacement without draining the
fluid being heated
Offers easy access to wiring
and ensures safety to user
Provide proper element
spacing to maximize heater
performance and life
Facilitates lifting of heavier units
Ensures element-to-flange
pressure seals do not leak
Pack more kilowatts in smaller
bundles—in liquid immersion
applications, a conventional
10-inch round tubular element
flange can be replaced with a
6-inch FIREBAR flange
Maintains MgO density,
dielectric strength, heat transfer
and life
Meets applicable safety codes
Designed and built for safety
UL
®
is registered to Underwriters Laboratories, Inc.
A subsidiary of Watlow, Designer and Manufacturer
of Industrial Heaters, Sensors and Controls
6 Industrial Loop Road
Hannibal, Missouri 63401 USA
Phone: 573-221-2816
Fax: 573-221-3723
Internet: www.watlow.com
Watlow Industries
© 1999 Watlow Electric Manufacturing Company
FAX-1943-056