Filter
Top Products
These brackets will work with all sizes of the
following models:
Wolf Vulcan
RB salamanders VSB salamanders
IRB salamanders VCM cheesemelters
CMJ cheesemelters
1. Follow the combustible/noncombustible
clearance guidelines that are listed in the
“Installation” section for the installation and
operation manual of the unit you are
installing.
2. Make sure brackets are level and properly
spaced so that bracket holes will align with
the threaded holes on the bottom of the
unit to be mounted.
3. Secure brackets to wall by means of lag
screws or bolts.
4. Mount the brackets only in the upside-down
“L” position as shown.
5. Make sure the lag bolts or screws engage
wall studs.
6. Place unit into position on the brackets,
making sure that the unit’s bottom threaded
holes are aligned with the holes in the
brackets.
7. Secure unit into position with 3/8” bolts at the
bottom of the unit through the holes in the
brackets.
INSTALLATION INSTRUCTIONS
MODEL WALLMNT-CHRBKR WALL MOUNT BRACKETS