Videx VX800N-2 Door User Manual


  Open as PDF
of 2
 
ENTER THE
ENGINEER’S CODE
RE-ENTER THE
ENGINEER’S CODE
ENTER ACCESS CODE
ENTER ACCESS TIME
PRESS ENTER TWICE TO
EXIT PROGRAMMING
Press Enter
(Red light will
illuminate*)
Press Enter
Press Enter
Press Enter
Repeat steps for
relay 2 and 3
RED light will
switch OFF
ALTERNATIVELY ENTER
A NEW ENGINEER’S
CODE(4TO8DIGITS)
RELAYCODE(4-8 DIGITS)
OPERATE THE DOOR OR
GATE.**
TWO DIGITS (01-99 Sec
OR 00 FOR REMAIN
OPEN)
More
DOORS
?
NO
YES
RE-PROGRAMMING GUIDE
Notes:
* If the red light does not illuminate, the engineer’s code is incorrect. Follow
instructions to return system to preset engineer’s factory code.
** On the first loop of the flow chart its relay 1, second loop is relay 2 and the
third loop is relay 3.
Engineer’s Code
Relay 1 Code
Relay 3 Code
Relay 1 Time
Relay 2 Time
Relay 3 Time
Relay 2 Code
18/12/2006
 previous