Filter
Top Products
16
PG 16
Notes on your system
Customer support:877-254-5625 or www.LockStateConnect.com
1
PG 1
LS-90 Installation Guide
• Your thermostat is a precise instrument, handle it with care.
• Turn off electricity to the HVAC system before installing or
servicing thermostat or any part of the system.
.detelpmoc si krow litnu no kcab yticirtcele nrut ton oD •
• Do not short (jumper) across electric terminals at the control
on the furnace or air conditioner to test the system. This may
damage the thermostat.
• All wiring must conform to local codes and ordinances.
• This thermostat is designed for use with 24 volt AC and
millivolt systems (with a separate 24VAC power adapter).
• The thermostat relay load should be limited to 1.0 amp;
higher amperage may cause damage to the thermostat.
To avoid electrical shock and to prevent damage to the
furnace, air conditioner, and thermostat, disconnect the power
supply before beginning work. This can be done at the circuit
breaker, or at the HVAC system.
SAVE
ENE
RGY
HVAC
STATUS
MENU
NORMAL
$0.05 KW
Pow
er Status Norm
al $.05/kW
h
H
E
A
T
12:30pm
5/25 WED
TA
R
G
E
T
77
o
TE
M
P
H
U
M
I
D
23
%
FAN
o
F
Caution
ENGLISH
Caution
H