Filter
Top Products
SetupTeledyne API – Model T300/T300M CO Analyzer
Teledyne Analytical Instruments 130
5.9.3.8. TURNING AN ANALOG OUTPUT OVER-RANGE FEATURE ON/OFF
In its default configuration, a ± 5% over-range is available on each of the
GFC7001T/GFC7001TM Analyzer’s analog outputs. This over-range can be disabled if
your recording device is sensitive to excess voltage or current.
To turn the over-range feature on or off, select the ANALOG I/O CONFIGURATION
submenu (see Figure 5-3) then press: