Sunbeam BFH5000 Fan User Manual


  Open as PDF
of 2
 
FIREPLACE heater
Calentador CHIMENEA
BFH5000
Read instructions before operating.
Retain for future reference.
Lea las instrucciones antes de poner a funcionar.
Guarde las instrucciones para futura referencia.
Instruction Leaflet
Folleto de instrucciones
INFO-LINE
If after having read this leaflet, you have any
questions or comments on your heater,
call 1-800-253-2764 in North America.
Si después de haber leído este folleto tiene preguntas
o comentarios sobre su calentador, por favor llame al
1-800-253-2764 en Norte América.
127015
1 YEAR LIMITED WARRANTY
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions
or if in Canada, Sunbeam Corporation (Canada) Limited doing busi-
ness as Jarden Consumer Solutions (collectively “JCS”) warrants that
for a period of one year from the date of purchase, this product will be
free from defects in material and workmanship. JCS, at its option, will
repair or replace this product or any component of the product found
to be defective during the warranty period. Replacement will be made
with a new or remanufactured product or component. If the product is
no longer available, replacement may be made with a similar product of
equal or greater value. This is your exclusive warranty. Do NOT attempt
to repair or adjust any electrical or mechanical functions on this product.
Doing so will void this warranty.
This warranty is valid for the original retail purchaser from the date of
initial retail purchase and is not transferable. Keep the original sales
receipt. Proof of purchase is required to obtain warranty performance.
JCS dealers, service centers, or retail stores selling JCS products do not
have the right to alter, modify or any way change the terms and condi-
tions of this warranty.
This warranty does not cover normal wear of parts or damage resulting
from any of the following: negligent use or misuse of the product, use on
improper voltage or current, use contrary to the operating instructions,
disassembly, repair or alteration by anyone other than JCS or an autho-
rized JCS service center. Further, the warranty does not cover: Acts of
God, such as fire, flood, hurricanes and tornadoes.
What are the limits on JCS’s Liability?
JCS shall not be liable for any incidental or consequential damages
caused by the breach of any express, implied or statutory warranty or
condition.
Except to the extent prohibited by applicable law, any implied warranty
or condition of merchantability or fitness for a particular purpose is
limited in duration to the duration of the above warranty.
JCS disclaims all other warranties, conditions or representations,
express, implied, statutory or otherwise. JCS shall not be liable for any
damages of any kind resulting from the purchase, use or misuse of, or
inability to use the product including incidental, special, consequential
or similar damages or loss of profits, or for any breach of contract,
fundamental or otherwise, or for any claim brought against purchaser by
any other party.
Some provinces, states or jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages or limitations on how
long an implied warranty lasts, so the above limitations or exclusion may
not apply to you.
This warranty gives you specific legal rights, and you may also have
other rights that vary from province to province, state to state or jurisdic-
tion to jurisdiction.
Garantía Limitada de 1 Año
Sunbeam Products, Inc. operando bajo el nombre de Jarden Consumer
Solutions, o en Canadá, Sunbeam Corporation (Canada) Limited
operando bajo el nombre de Jarden Consumer Solutions, (en forma
conjunta, “JCS”), garantiza que por un período de un año a partir de la
fecha de compra, este producto estará libre de defectos de materiales
y mano de obra. JCS, a su elección, reparará o reemplazará este
producto o cualquier componente del mismo que presente defectos
durante el período de garantía. El reemplazo se realizará por un
producto o componente nuevo o reparado.
Si el producto ya no estuviera disponible, se lo reemplazará por un
producto similar de valor igual o superior. Ésta es su garantía exclusiva.
No intente reparar o ajustar ninguna función eléctrica o mecánica de
este producto. Al hacerlo elimínará ésta garantía.
La garantía es válida para el comprador minorista original a partir de
la fecha de compra inicial y la misma no es transferible. Conserve el
recibo de compra original. Para solicitar servicio en garantía se requiere
presentar un recibo de compra. Los agentes y centros de servicio
de JCS o las tiendas minoristas que venden productos de JCS no
tienen derecho a alterar, modificar ni cambiar de ningún otro modo los
términos y las condiciones de esta garantía.
Esta garantía no cubre el desgaste normal de las piezas ni los daños
que se produzcan como resultado de uso negligente o mal uso del
producto, uso de voltaje incorrecto o corriente inapropiada, uso
contrario a las instrucciones operativas, y desarme, reparación o
alteración por parte de un tercero ajeno a JCS o a un Centro de Servicio
autorizado por JCS. Asimismo, la garantía no cubre actos fortuitos tales
como incendios, inundaciones, huracanes y tornados.
¿Cuál es el límite de responsabilidad de JCS?
JCS no será responsable de daños incidentales o emergentes
causados por el incumplimiento de alguna garantía o condición expresa,
implícita o legal.
Excepto en la medida en que lo prohíba la ley aplicable, cualquier
garantía o condición implícita de comerciabilidad o aptitud para un fin
determinado se limita, en cuanto a su duración, al plazo de la garantía
antes mencionada.
JCS queda exenta de toda otra garantías, condiciones o
manifestaciones, expresa, implícita, legal o de cualquier otra naturaleza.
JCS no será responsable de ningún tipo de daño que resulte de la
compra, uso o mal uso del producto, o por la imposibilidad de usar
el producto, incluidos los daños incidentales, especiales, emergentes
o similares, o la pérdida de ganancias, ni de ningún incumplimiento
contractual, sea de una obligación esencial o de otra naturaleza, ni de
ningún reclamo iniciado contra el comprador por un tercero.
Algunas provincias, estados o jurisdicciones no permiten la exclusión o
limitación de los daños incidentales o emergentes ni las limitaciones a la
How to Obtain Warranty Service
In the U.S.A.
If you have any question regarding this warranty or would like to obtain
warranty service, please call 1-800-253-2764 and a convenient service
center address will be provided to you.
In Canada
If you have any question regarding this warranty or would like to obtain
warranty service, please call 1-800-253-2764 and a convenient service
center address will be provided to you.
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing
business Jarden Consumer Solutions located in Boca Raton, Florida
33431. In Canada, this warranty is offered by Sunbeam Corpora-
tion (Canada) Limited doing business as Jarden Consumer Solutions,
located at 20B Hereford Street, Brampton, Ontario L6Y 0M1. If you have
any other problem or claim in connection with this product, please write
our Consumer Service Department.
PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF
THESE ADDRESSES OR TO THE PLACE OF PURCHASE.
duración de las garantías implícitas, de modo que es posible que
la exclusión o las limitaciones antes mencionadas no se apliquen en
su caso.
Esta garantía le otorga derechos legales específicos y es posible que
usted tenga otros derechos que varían de un estado, provincia o
jurisdicción a otro.
Cómo solicitar el servicio en garantía
En los Estados Unidos –
Si tiene alguna pregunta sobre esta garantía o desea recibir servicio
de garantía, llame al 1-800-253-2764 y podrá obtener la dirección del
centro de servicio que le resulte más conveniente.
En Canadá –
Si tiene alguna pregunta sobre esta garantía o desea recibir servicio
de garantía, llame al 1-800-253-2764 y podrá obtener la dirección del
centro de servicio que le resulte más conveniente.
En los Estados Unidos, esta garantía es ofrecida por Sunbeam
Products, Inc. operando bajo el nombre de Jarden Consumer Solutions,
Boca Ratón, Florida 33431. En Canadá, esta garantía es ofrecida por
Sunbeam Corporation (Canada) Limited operando bajo el nombre de
Jarden Consumer Solutions, 20 B Hereford Street, Brampton, Ontario
L6Y 0M1. Si usted tiene otro problema o reclamo en conexión con este
producto, por favor escriba al Departamento de Servicio al Consumidor.
POR FAVOR NO DEVUELVA ESTE PRODUCTO A NINGUNA
DE ESTAS DIRECCIONES NI AL LUGAR DE COMPRA.
PLEASE DO NOT RETURN THIS PRODUCT TO
THE PLACE OF PURCHASE. If you have any questions
regarding your Bionaire product, please call us at
1-800-253-2764 or visit us on the web at
www.bionaire.com.
POR FAVOR NO DEVUELVA ESTE PRODUCTO A
EL LUGAR DONDE LO COMPRÓ. Si tiene algunas
preguntas acerca de su producto Bionaire, favor llame
al teléfono: 1-800-253-2764 o visite nuestra página web:
www.bionaire.com
© 2008 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions.
All rights reserved. Distributed by Sunbeam Products, Inc. doing business as
Jarden Consumer Solutions, Boca Raton, Florida 33431.
©2008 Sunbeam Products, Inc. operando bajo el nombre de Jarden Consumer
Solutions. Todos los derechos reservados. Distribuido por Sunbeam Products,
Inc. operando bajo el nombre de Jarden Consumer Solutions, Boca Raton,
Florida 33431.
Printed in China/Impreso en China
HEATER SAFETY
PLEASE READ AND SAVE
THESE IMPORTANT
SAFEGUARDS
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock, and injury to persons, including the following:
1. Read all instructions before using the appliance.
2. To avoid fire or shock hazard, plug the appliance directly into
a 120V AC electrical outlet.
3. The heater is hot when in use. To avoid burns, DO NOT
let bare skin touch hot surfaces. Use handle when moving
this heater. Keep combustible materials, such as furniture,
pillows, bedding, papers, clothes, and curtains at least 3
ft (0.9 m) from the front of the heater and keep them away
from the sides and rear.
4. DO NOT run cord under carpeting. DO NOT cover cord with
throw rugs, runners, or the like. Arrange cord away from
traffic area and where it will not be tripped over.
5. This heater is not intended for use in bathrooms, laundry
areas and similar indoor locations. NEVER locate heater
where it may fall into a bathtub or other water container.
6. Extreme caution is necessary when any heater is used by,
or near children or invalids, and whenever the heater is left
operating and unattended.
7. Always unplug the heater when not in use.
8. When unplugging, be sure to pull by the plug and not the
cord.
9. DO NOT insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause an electric
shock or fire, or damage the heater.
10. DO NOT operate heater with a damaged cord or plug, or
after the heater malfunctions, or has been damaged in any
manner. Return appliance to manufacturer for examination,
electrical or mechanical adjustment, or repair.
11. A heater has hot and arcing or sparking parts inside. DO
NOT use it in areas where gasoline, paint, or flammable
liquids are used or stored.
12. Use appliance only for intended household use as described
in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or injury to
persons. The use of attachments not recommended or sold
by the manufacturer may cause hazards.
13. DO NOT use outdoors.
14. To prevent a possible fire, DO NOT block air intakes or
exhaust in any manner. DO NOT use on soft surfaces like a
bed, where openings may become blocked.
15. To disconnect heater, turn unit Off, then remove plug from
outlet.
16. Avoid the use of an extension cord because the extension
cord may overheat and cause a risk of fire. However, if you
have to use an extension cord, the cord should be No.
14AWG minimum size and rated not less than 1875 watts.
17. If the heater will not operate, see specific instructions under
Auto Safety Shut-off on resetting the heater.
18. DO NOT attempt to repair or adjust any electrical or
mechanical functions on this unit. Doing so will void your
warranty. The inside of the unit contains no user serviceable
parts. All servicing should be performed by qualified
personnel only.
19. DISCONTINUE USE IF PLUG OR OUTLET IS HOT.
RECOMMEND OUTLET BE REPLACED IF PLUG OR
OUTLET IS HOT TO TOUCH.
PLEASE SAVE THESE
INSTRUCTIONS
CONSUMER SAFETY INFORMATION
THIS APPLIANCE HAS A POLARIZED
PLUG (one blade is wider than the other).
To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician
to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR
DEFEAT THIS SAFETY FEATURE IN ANY WAY.
PLEASE READ AND SAVE
THESE IMPORTANT
SAFETY INSTRUCTIONS
TECHNICAL SPECIFICATIONS
Amps: 12.5
Wattage: 1500W/ (+ 5% - 10%)
Working Voltage: 120V AC/60 HZ
Bulb Type: (2) 25W max Candelabra Base
Avoid overloading your circuit by not using other high
wattage appliances in the same outlet. At 1500 Watts,
this unit draws 12.5 Amps.
ASSEMBLY INSTRUCTIONS
Please make sure to check packaging for parts that
could be used to operate your heater.
This package includes:
1 - Fireplace Heater 2 - Light bulbs
1 - Remote Control 2 - AAA Batteries for Remote Control
1 - Stand 4 - Machine Screws (for stand)
1 - Wall Mount Hardware Kit
Installing Batteries into the Remote:
Before operation, insert 2 “AAA” batteries into the back of
the remote control:
• Do not mix old and new batteries
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries
The remote control for this unit has the capability of
remote will not work through walls.
Bulb Installation:
Unwrap the two 25W Candleabra Bulbs from foam
packaging material and open doors on back of unit with a
flathead screwdriver.
(Front of Heater)
(Back of Heater)
Fig. 2
Fig. 1
KEY TO ICONS REMOTE CONTROL
CONTROL PANEL
On/Off
Thermostat
Timer
Flame Brightness
Sound
Fahrenheit/Celsius
OPERATING INSTRUCTIONS
• There may be an odor coming from the heater the
first time you use it. This is normal during the break-in
period or after long term storage. Make sure the heater
is in a well ventilated area and continue running it until
the smell goes away.
• You may hear a popping or crackling sound as the
heater heats up. This is normal and safe operation.
• The Fireplace Heater can be operated by using the
remote control (Fig. 1) or the control panel (Fig. 2)
located on the top of the unit.
• Place the heater on a rm, level surface or mount on
wall.
• Avoid overloading your circuit by not using other high
wattage appliances in the same outlet. At 1500 Watts,
this unit draws 12.5 Amps.
(Front of Heater)
(Back of Heater)
Power On/Off
First button push will illuminate LCD and power light. The
units default settings are: Temperature 80°; Timer OFF;
Flame Brightness HIGH; Sound ON. After turning th unit
Off, the fan will continue to run for 10 seconds to cool unit
down.After all settings are chosen, LCD will go dark.
(Front of Heater)
(Back of Heater)
Thermostat
• Press Thermostat button until desired temperature level
appears on LCD Display. It is recommended to start by
setting the temperature to the highest setting. Note: the
fan will continue to run for flame operation without heat.
• The system now maintains the selected comfort level
by automatically turning the heater ON and OFF. The
Thermostat
(Front of Heater)
(Back of Heater)
cycles ON and OFF with the heater
element as it maintains the programmed temperature.
• When LCD reads 00 the heat will turn off but the fan will
continue to run for flame operation.
(Front of Heater)
(Back of Heater)
Timer
You can set the timer to automatically turn the unit off.
Press the Timer button, select between 1 and 12 hours.
Your selection will then be displayed on the LCD
(Front of Heater)
(Back of Heater)
Flame Brightness
There are four flame brightness settings: HIGH, MEDIUM,
LOW, OFF. Press button to select desired brightness.
(Front of Heater)
(Back of Heater)
Sound
Press Sound button to turn crackling sound on or off. The
sound volume can be adjusted to 4 levels and turned off.
Push the button to cycle through. To turn the sound off
immediately hold the sound button for two seconds and
release.
(Front of Heater)
(Back of Heater)
Fahrenheit/Celsius
Press to show temperature in Fahrenheit or Celsius.
Wall Mounting Template
To mount into wall studs
1. Find studs in wall. Studs are typically 16” apart.
2. Cut Mounting Template on dotted line and tape onto wall so
brackets are centered on studs.
3. Use level to make sure template is level. Using a sharp object
such as an awl, mark hole location.
4. Using a Power Driver with Phillips head bit, drive 1.5” screws
through bracket and drywall into wood or metal stud.
IMPORTANT: Before drilling into any wall ensure no
electrical cables are present in the area.
To mount into drywall
Use toggle bolts for 3/8 - 5/8” thick drywall.
1. Cut Mounting Template on dotted line and tape onto wall. Use level to make sure
template is level and mark wall with a sharp object such as an awl.
2. Drill 3/8” holes at top and bottom of bracket guide in center of studs.
3. A - Align bolts, through bracket holes then thread on Spring Loaded Wings. (Fig. A)
B - Collapse Wings while pushing through hole in wall. (Fig. A)
C - Pull bolt out to secure Toggle Wings against inside of wall (wings spring open
on other side of wall and securely hold bolt and bracket). (Fig. B)
D - Screw bolt in until tight.
Mark for
Drill
Mark for
Drill
Mark for
Drill
Mark for
Drill
10 inches 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Bracket
Bolt
Toggle
Wall
Drilled
Hole
Wall
Spring
Loaded
Toggle
opens on
inside of
wall
Included for mounting:
4 - 1.5” Phillips head self
tapping screws
4 - toggle bolts
2 - mounting brackets
BRACKET
GUIDE
BRACKET
GUIDE
Note: The mounting hardware included is intended for mounting the heater on 3/8” to 5/8” drywall affixed to wood or metal studs. For your convenience the wall mount brackets are 16”
on center to align with 2 studs. Not all studs will be 16” on center. If you are not able to align with studs, toggle bolts are provided. For other wall types, please consult a professional or visit
your local hardware store to determine which type of hardware is best for your particular wall.
Fig. B
Fig. A
Stand Assembly:
For floor use attach the Stand to the Fireplace heater
using the 4 machine screws (provided). Gently lay the unit
on the floor and attach the Stand to the bottom. For wall
mount see Wall Mount Instructions below.
Wall Mount Installation:
This product weighs 25 lbs. Do not install alone.
Mounting Template with instructions is attached below to
make mounting your Fireplace Heater easy.
• Wall Mount Hardware Kit includes:
4 - 1.5” Phillips head self tapping screws
4 - toggle bolts
2 - mounting brackets
IMPORTANT: Before drilling into any wall ensure no
electrical cables are present in the area.
Max height of 47” (1.2m)
Make sure you allow at least 3 feet of space on sides
of unit.
1. Remove stand from main unit, if installed.
2. Secure the mounting brackets to the wall using the Wall
Mounting Template provided (see below).
3. Hang main body on wall brackets by lifting over the
bracket and sliding down.
4. Use Cord Wrap to hide extra cord.
Brackets
3 ft.
3 inch minimum
3 ft.