Filter
Top Products
BP1620, BP1628 & BP1640 Granulators Page 42 BP1600
Problem Possible Cause Solution
Knives are dull.
Sharpen knives (refer to
Section 9) and re-install.
Plastic is clogging the
screens or transition,
preventing proper fan
evacuation.
Shut the machine down
and clean.
Rotor speed is too fast. Change the pulleys.
Fines
Screen size is too small.
Change to a screen with
larger holes.
12 Spare Parts
12-1 Recommended Spare Parts
In order to reduce the amount of down time required to
service a granulator, it is recommended that the following be
kept in stock at your facility: