Filter
Top Products
BP1620, BP1628 & BP1640 Granulators Page 20 BP1600
5 Accessing Screen Chamber
5-1 Opening Screen Chamber
1. Allow all material to run out of the cutting chamber and
screen chamber.
2. Shut OFF and LOCKOUT all power including the main
disconnect switch.
3. Remove discharge chute located below the screen chamber.
4. Loosen (2) fasteners holding the screen cradle in position.
As the fasteners are designed to remain with the screen
chamber, it is not necessary to totally remove them from the
screen chamber.
5. Guide the screen chamber to it’s resting position.
Hopper (Located under
screen chamber.)
2 fasteners holding
the screen cradle in
position.
Screen chamber in
resting position.
Screen