Filter
Top Products
BP1620, BP1628 & BP1640 Granulators Page 16 BP1600
Loosen the fastener in the right side front door. Note that
this fastener does not need to be completely removed from
the front access door, as it is designed to be captive for
convenience.
NOTE: DO NOT USE ANY OTHER MEANS TO CRANK
OPEN THE MACHINE OTHER THAN THE HAND
CRANK PROVIDED. Using other methods of turning
the jack could result in damage to the unit.
Rotate the hand crank clockwise to open the cutting
chamber approximately 90
o
(For more information on
opening the cutting chamber refer to Section 4).
Fastener (turn
counter-clockwise to
loosen)
Hand Crank (RH
Side of Machine)