Filter
Top Products
8. In stal la ti on in struc tions
Ver si on: 64.10-0251GB01 08/02
»
The se in stal la ti on in struc tions are in ten ded for per sons with skills in elec tri -
cal and me cha ni cal are as due to their trai ning, ex pe rien ce and re cei ved in -
struc tions.
Per son nel using the se in stal la ti on in struc tions must be in struc ted in the re -
gu la tions for the pre ven ti on of ac ci dents, the ope ra ting con di tions and sa fe ty
re gu la tions and their im ple men ta ti on.
En su re in each case that the per son nel are in form ed.
The in stal la ti on in struc tions pro vi ded in the cor re spon ding ope ra ting in struc -
tions ap ply for all con nec ted equip ment.
Ob ser ve sa fe ty re gu la tions with re gard to lif ting gear hand ling
All in stal la ti on work must be car ried out with the equip ment dis con nec ted
from elec tri cal po wer and com pres sed air supp ly.
L
For in stal la ti on work ta king pla ce at heights of over approx.1829 mm (6
ft.), use only lad ders or si mi lar equip ment and wor king plat forms in ten -
ded for this pur po se. At grea ter heights, the pro per equip ment for pro tec -
ti on against fal ling must be worn.
Use only suit ab le lif ting gear which is in pro per wor king or der and load
sus pen si on de vi ces with suf fi cient car ry ing ca pa ci ty. Do not stand or
work un der sus pen ded lo ads!
Use suit ab le work shop equip ment.
F
In stall the equip ment such that all parts are ea si ly ac ces si ble; this fa ci li ta -
tes main ten an ce and re pair work.
146-3MS
SKW-E
In stal la ti on in struc tions 8-1