Filter
Top Products
COMMERCIAL
For more information on this product contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA
www.statewaterheaters.com
SOLID.STATE.
SANDBLASTER
COMMERCIAL ELECTRIC WATER HEATERS
Designed for use as a recovery heater having its own storage tank or booster for
supplying sanitizing rinse water for dishwashing.
FEATURES
Meets the standby loss requirements of the U.S. Department of Energy and current
edition ASHRAE/IESNA 90.1.
ADVANCED ELECTRONIC CONTROL - Plain English text and animated icons
display detailed operational and diagnostic information. Fault or Alert messages appear
if an operational issue occurs. Immersion temperature control adjustable through a
range of 90°F to 190°F.
ECONOMY MODE OPERATION - Control system automatically lowers the
Operating Set Point by a programmed value during user-defined time periods. Helps
reduce operating costs during unoccupied or off - peak demand periods.
LINEAR SEQUENCING - Banks of heating elements (3 elements per bank) are
energized according to adjustable (1 to 20°) differential set points for each bank. First
bank on is the last bank off. Helps reduce current surge and provides accurate water
temperature control.
GOLD ELEMENTS - CSB models ship with the gold plated elements (see element
availability chart on back). Patented elements provide long life and superior scaling
resistance. Low watt density means lower surface temperature to minimize scale buildup
and more surface to heat water. Gold elements carry a one-year warranty against failure
due to lime scale buildup.
GLASSLINED TANK - Three sizes: 50, 80 and 119-gallon capacity. Tank interior is
coated with glass specially developed for water heater use. Tanks rated at 150 psi (1034
kPa) working pressure (ASME 150 psi). Foam insulation reduces costly heat loss, and is
vermin proof.
FUSING - Protects all elements, thermostats, and internal wiring circuits against excess
current flow. Meets National Electrical Code requirements that non-ASME tanks must
have internal fusing when current draw exceeds 48 amps.
STANDARD VOLTAGES - 208, 240 and 480V single-phase and three-phase delta.
Convertible from three-phase to single-phase (in field) and vice versa. 277V single-phase
also available.
TERMINAL BLOCK - Factory installed. Just bring the service to the heater and
connect to block.
MAGNETIC CONTACTORS - Heavy duty, UL rated 100,000 cycles.
OTHER STANDARD FEATURES -
Immersion style thermostats
Simplified circuitry, color coded for ease of service
Two anode rods for maximum corrosion protection Cabinet has bonderized
undercoat with baked enamel finish
Bottom inlet and top outlet openings Brass
drain valve CSA certified and ASME rated T&P Relief Valve Single panel control box
THREE YEAR LIMITED TANK WARRANTY - For complete warranty information,
consult written warranty or contact State Water Heaters.
OPTIONS -
UL listed conversion kits to adjust voltage and kW requirements in the field before
and after installation ASME 150 psi tank construction International voltages - 220,
380, 400, 415, 575, and 600 volts, three phase available with Y connected elements
MANIFOLD KITS - for multiple tank installations. Two heaters -part # 9003429205, three
heaters- part # 9003430205 and four heaters- part # 9003431205
MODELS
CSB 52, 82, 120
IMMERSION MOUNT THERMOSTATS
Revised May 2011 80600SSECS
(Optional)
231451_SCESS00608.indd 1 11/29/10 2:52 PM
■
■
■
■
■
■
■
■
■
■
■
■
■
iCOMM™ compatible and can be monitored from remote locations. Call 1.888.WATER02
for more information.
■
Low Lead Content
236828_SCESS00608.indd 1 5/27/11 9:47 AM