Filter
Top Products
7 (US)
Before assembling
• Be sure to have a Phillips screwdriver that fits the screws prior to
the assembly.
• When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
Step 2:
Installing the TV
1
Position the Neck-Spacer on the
TV Stand.
The Neck-Spacer is used for adjusting the height of the
Neck and TV.
Be sure to attach the Neck-Spacer.
For KDL-55HX82x/46HX82x/55NX72x/46NX72x
only:
12 cm ~
Neck-Spacer
2
Attach the Neck and the Neck-
Spacer (for KDL-55HX82x/
46HX82x/55NX72x/46NX72x only)
to the TV Stand with the four
Neck Screws (PSW4 × 12)
(supplied).
3
When moving the TV, hold the TV
as shown below.
Neck
Neck Screw
(PSW4 × 12)
(Continued)