Soleus Air MAC-12K Air Conditioner User Manual


 
-9-
NOTE: The unit operates at low fan speed during dehumidifying. The unit cools room slightly
during the dehumidification.
Keep the windows and the doors closed to aid the effectiveness of the unit in removing the
moisture from the room.
NOTE: The unit will not perform dehumidification when the room temperature is lower than 61
degree.
3) Fan Operation
a) Plug the Power Cord to the power outlet.
b) Turn on the unit by pressing the On/Off Button on the control panel.
c) Press the Mode Button until “FAN” appears on the LCD display.
d) Select the fan speed by pressing the Fan Speed Button.
NOTE: When the unit is running on fan mode, the exhaust duct is inoperative and is not
required.
4) Heating Operation
a) Plug the Power Cord to the power outlet.
b) Turn on the unit by pressing the On/Off Button on the control panel.
c) Press the Mode Button until “HEAT“ appears on the LCD display.
d) Press the Temperature/Time Button or until the desired room
temperature appears on the LCD. The temperature ranges from 61
o
F-88
o
F (16
o
C-31
o
C).
e) Select the fan speed by pressing the Fan Speed Button. It is
recommended to use a low fan setting.
NOTE: When the unit is running on heating mode, the exhaust duct is inoperative and is not
required.
5) Auto Operation
a) Install the exhaust ducts properly
b) Plug the Power Cord to the power outlet.
c) Turn on the unit by pressing the On/Off Button on the control panel.
d) Press the Mode Button until the “AUTO” appears on the LCD display.
e) Select the fan speed by using FAN button.
During the AUTO model, the unit operates at heating mode when the room temperature is below
68 degree. It operates at dehumidifying mode when the room temperature is between 68 to 80
degree. It operates at cooling mode when the room temperature is above 80 degree. You may
use the timer with the AUTO mode.