Soleus Air MAC-12K Air Conditioner User Manual


 
-8-
The LTD display either in Celsius or Fahrenheit. Press Temperature/Time /\ and \/ keys
simultaneously to change the display from Celsius to Fahrenheit or vice verse.
5) Select and Set/Cancel
Using Select and Temperature/Time keys to set clock and timer. To set clock, press the
Select key until the LCD display shows flashing current time. Pressing either /\ or \/
Temperature/Time keys to change the clock to the current time. Press Select key again
until the display shows current time in a constant mode.
To program the timer, press Select key until the LCD display shows a flashing “on”.
Pressing either /\ or \/ Temperature/Time keys to change the clock to the desired time for
the unit being turned on. Press Select key one more time and the LCD display will show
a flashing “off”. Pressing either /\ or \/ Temperature/Time keys to change the clock to the
desired time for the unit being turned off. Press the Select key again until the display
shows a constant clock
To activate the timer that you programmed, press Set/Cancel button to chose either on,
off or repeating (on-off) of the timer operation.
OPERATION USING CONTROL PANEL
1) Cooling Operation
a) Install the exhaust ducts properly.
b) Plug the Power Cord to the power outlet.
c) Turn on the unit by pressing the On/Off Button on the control panel.
d) Press Mode Button until “Cool” appears on the LCD display
e) Press the Temperature/Time Button or until the desired room
temperature appears on the LCD. The temperature ranges from
61
o
F-88
o
F (16
o
C-31
0
C).
f) Select the fan speed by pressing the Fan Button.
NOTE: During hot days, the unit will cool off the room most efficiently by setting the
temperature at the lowest and the fan speed at the highest. Reducing the length of the exhaust
duct and insulating the exhaust duct and keeping direct sunlight to a minimum will also improve
the cooling efficiency.
2) Dehumidifying Operation
a) Install the exhaust ducts properly
b) Plug the Power Cord to the power outlet.
c) Turn on the unit by pressing the On/Off Button on the control panel.
d) Press the Mode Button until the “DRY” appears on the LCD display.