1
5
6
2
3
4
is06718
1. Mount transmitter to fairing
2. Headlamp connector
3. Orange/white wire
4. Black wire
5. White wire
6. Yellow wire
Figure 10.Wires for Transmitter Connections (FLTR)
2002-2003 V-Rod Models
1. See Figure 11. Remove the screw (3) fastening the front
left louvered cover (1) to the motorcycle. Lift the louvered
cover off the tabs (2) to remove the cover.
2. See Figure 12. Use cable ties to fasten the transmitter (1)
to the motorcycle wire casing (2) as shown.
Proceed to the Harness Connection section.
1
3
2
is06720
1. Louvered cover
2. Tab (2)
3. Screw
Figure 11. Left-Side Louvered Cover (2002-2003 V-Rod
Shown)
1
3
2
is06721
1. Transmitter
2. Tie transmitter cable to wire casing
3. Connector with black (ground) and orange wires
Figure 12.Transmitter Mounting (2002-2003 V-Rod Only)
2007 and Later V-Rod Models
1. See Figure 11. Remove the screw (3) fastening the front
left louvered cover (1) to the motorcycle. Lift the louvered
cover off the tabs (2) to remove the cover.
2. See Figure 13. Remove the air box cover. Rotate the
transmitter (1) so the exposed circuit side faces up. Tuck
the transmitter under the fuse block wire harnesses. Use
two cable straps from the kit through the flanges of the
transmitter to secure the transmitter to the fuse block
harnesses.
Proceed to the Harness Connection section.
1
2
is06722
1. Transmitter
2. Fuse block wire harness (2)
Figure 13.Transmitter Mounting (2004 and Later V-Rod)
-J02028 6 of 16