Open as PDF
Presser foot pressure is vital for strsight
seame, uniform etitch length and even
handling of both isyml of hlbdo, To adjust
pressure; use pressure regulator whk:h Is
located inside the face cover, To Incremm
p_ure, turn the diald6ckwlse, To decrease
pressure,turn thedlal €ounterclockwise.
Seam guides ate engraved in needle plate at
both s_ of feed dog holes to help you line
up the febHo and keep it atrsighL The
standard seam width is 5/8", So these li_
are emphasized, easy to follow.
Each dimension on _le plate indicates
seam width from needle al Center position.
If using either Right or Left _le position,
add or subtract 1/8" to the marking.
Alsothe crosslinesere "cornering guides" to
h_ when turning n square €omer 5/8" from
the fabric _e. tFo¢detailson €_erlng, see