Filter
Top Products
HOW TO USE THE HOSE STAND /
Stand the vacuum
cleaner up and insert t
he pipe holder into the
pipe-holder hole.
2
Hold the hose and
wind it around
the pipe.
3
1
Shorten the extension
pipe.
2. Lightly tap the filter to
remove the dust.
If you are concerned about dust on the filter:
1. Wash the filter with water.
If the dust is not easily removed, use a
brush for removal.
2. Dry the filter thoroughly.
Caution:
Do not dry in direct sunlight or
by heating, as the filter may
become damage. Never put the
filter into the vacuum cleaner
unless it is completely dry.
To assure the best results, we recommend cleaning the filters once every one (1) year,
depending on usage.
1. Slide the lever in the direction of
the arrows to remove the dust
by shaking.
FILTER CARE /
When the suction power is low and the dust has been discarded, the filter still should be cleaned.
Caution
Do not carry the vacuum
cleaner while it is in the
storage position.
(Injury or damage may result
if the hose or coupling pipe
becomes unattached.)
Lever
Wind
Hold here
2
1
Pipe holder hole
Pipe holder