Filter
Top Products
12_ operating
operating your air conditioner
SELECTING OPERATION MODE
Cooling
Transform a hot and humid room into a cool haven quickly by closing all unnecessary openings
such as fireplace dampers, doors, or windows in the room before running the air conditioner to
increase efficiency and save energy.
1. Turn on the air conditioner.
Press the Power button on the remote control.
You will hear two short beeps and the air
conditioner will turn on.
2. Set the operating mode.
Press the Cool button on the remote control to
select Cool mode.
icon will appear on the display.
3. Set the temperature.
Press the Temp button on the remote control.
Press or button to increase or decrease the
desired temperature.
You can set the desired temperature within the
range of 64˚F~ 86˚F in Cool mode.
You can increase/decrease the temperature in 1˚F units.
4. Set the fan speed.
Press the Low/Med/High button on the remote
control.
One of the following icons will appear on the display.
Low fan speed is activated.
Medium fan speed is activated.
High fan speed is activated.
• When you are using the remote control, make sure corresponding icon appears on the
display.
• If current outside temperatures are much higher than the selected indoor temperature,
it may take time to bring the inner temperature to the desired coolness.
• Air flow can also be adjusted manually. (See page 15 for instructions.)
• Avoid drastically turning down the temperature. Energy is wasted and the room does not
cool faster.