Filter
Top Products
E-20
Installation (cont.)
Checkpoints prior to installation
1
Check the cabinet and front grille of the unit for any harmful defects
such as scratches
.
2
Be sure to check the power supply.
- Refer to the specifications on the label attached to the unit
.
Before installation, be sure to check the installation area or the air
conditioner,
and drain hose.
Installation Conditions
1
As the unit is heavy, the wall or window of the installation area should
have sufficient strength and durability for operation of the air conditioner
,
and for prevention of any vibration or noise
.
If it is weak, reinforcement work should be performed separately
.
2
It is advisable to install the air conditioner in the north or west side to
prevent the effect of direct sunlight
.
When installing it in the south or east side due to unavoidabl
e
circumstances, it is advisable to install the sunshade to prevent th
e
direct sunlight
.
In this case, take care not to cause any hindrance to the flow of outside air
.
3
When installing the air conditioner, be sure to obtain sufficient space on
the rear side of the unit for smooth flow of air
.
When operating the air conditioner in closed areas such as inner buildin
g
with cooling operation, and result in trouble with the unit
.
See the illustration below
.
500mm 500mm
75mm
min.
300mm
500m
m
150mm
min.
"A"
Approx.3
750mm
45
45
The appliance must be fixed well by screw or similar
method.
Awning
Fence,
wall
or
other
obstacle
If the wall is greater than 150mm thick,
cut
the wall back on a 45 angle if possible.
Outdoor
side
Indoor
side
100mm or more
MODEL “A”
AW07/AW08/AW09
145
AW10/AW12
170
260
DB98-26004A.indd 20 2006-12-5 16:37:43
AW14/AW18/AW24