Filter
Top Products
Airing Your Room
If the atmosphere in your room is stale, you can air it using the Fan
feature and if necessary, evacuate the stale air outside.
1 If you wish to evacuate stale air outside, push the ventilation lever on the
front of the unit to the right and the open position ( ).
Result
: The air inside the room circulates and stale air is evacuated
outside.
Otherwise, push the ventilation lever to the left and the closed position ( ).
Result
: The air simply circulates inside the room.
2 If necessary, press the (On/Off) button.
Result
: ◆ The operating mode indicator (COOL or FAN) on the
unit comes on.
◆ The air conditioner starts up in the mode selected
when the unit was last used.
◆ The unit beeps twice.
3 If the FAN indicator is not lit up on the unit:
◆ Press the FAN button on the remote control
or
◆ Press the POWER/MODE button on the unit one or more times until
the FAN indicator lights up
Result: ◆ The unit beeps each time you press POWER/MODE.
◆ The air conditioner starts up in Fan mode.
➢
◆ You can change modes at any time.
◆ When the air conditioner is in Fan mode, the
temperature is not displayed; moreover, you do not
need to set the temperature.
4 To set the fan speed to... Then...
High Press the button on the remote control.
Low Press the button on the remote control.
Result
: Each time you press a button, the unit beeps.
5 To control the direction of the air flow, refer to page 10.
Remote Control
Control Panel
E-
9
ENGLISH