Filter
Top Products
E
-
14
Setting the On Timer
The On Timer enables you to switch on the air conditioner automatically
after a given period of time. You can set the period of time from 0
.5 hour
to 24 hours.
1 To set the operating time, press the button one or more times until
the required time is displayed. Possible time is between 0.5 hour and
24 hour inclusive.
2
Press the button to complete the setting.
Result:
The remaining time is displayed.
Blinking of the timer indicator stops.
The selected mode and the temperature on the display
disappear after 10 seconds.
The air conditioner will switch on automatically when the
counter displayed on the remote control reaches the set time
and disappears the On Timer setting.
3
To select an operating mode in advance, press the
button until the
desired mode is displayed at the top of the remote control.
Result:
The air conditioner will run in the selected mode when it is
turned on.
Note
If you don’t operate the remote control after setting the On Timer,
it will be turned off automatically after 25 hours.
To Cancel the On Timer
If you no longer wish to use the On Timer that you have set, you can
cancel it at any time.
1 To cancel the On Timer, press the button one or more times until
the timer setting disappears.
2
Press the button.
Note
If you want to turn on the air conditioner before the timer reaches
the setting time, press the
button.
DB98-26505A(1)-E.indd 14 2006-10-27 15:46:09