Filter
Top Products
DESCRIPTION
Catalog # Type
Project
Comments Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
Thermal
Protector
9.45”
6.69”
33.44”
39.76”
34.94”
43.89”
16.01”
8.19”
Integral Electronic
Metal Halide Ballasts
45º x 45º
Adjust
Double
Gimbal
6.69”
A ... Housing
Housing, junction box & trim assembly
are all steel construction. Fixture utilizes
a removable trim sleeve to provide a
0.75” flange around the ceiling opening
and to help conceal the inner hardware
of the fixture from sight below the ceiling.
Can accommodate 0.50” to 1.25” ceiling
thickness. Optional Chicago Plenum
configuration available.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply con-
ductors or 60º C for end of run. The fixture
is also UL listed as ‘access above ceiling
not required’.
D ... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic metal halide
ballasts on individually removable “trays”
for easy maintenance. May also be con-
figured for remote power.
E ... Lamps
Five (5) PAR38 Metal Halide lamps mount-
ed in adjustable double gimbals. Lamp
holders are individually removable and
may be regressed 1” for additional cut-off.
Lamp can accept optical accessories. 45º
x 45º locking lamp adjustment. Beveled-
edge lamp ring is secured with threadless,
bayonet action. Optional retractable arm is
available for lamp pulldown and extreme
aiming. Includes Med. base sockets.
F ... Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 7.49” x 34.24”
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
Five (5) Light
PAR38 Metal Halide
New Construction
Housing
w/ 0.75” Trim Flange
ORDERING INFORMATION
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes FIVE (5) PAR38 Metal Halide
lamps.
For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Configuration
C5
=
COMBOLIGHT
Recessed Five (5) Light
Housing
N
=
New Construction
C
=
Chicago Plenum
C5 E T
Lamp Type / Wattage Label
070M38
=
70 Watt PAR38 Metal Halide
100M38
=
100 Watt PAR38 Metal
Halide
Power Supply
E
=
Electronic Metal Halide
Ballast
Power Supply
Voltage
1
=
120V
2
=
277V
Lamp Mechanism
G
=
Double Gimbal
R
=
Retractable Double Gimbal
Trim Finish
W
=
White
B
=
Black
S
=
Industrial Silver
Trim Flange
T
=
0.75” Trim Flange
Housing Interior/Electrical Door/Sleeve
Finish
W
=
White
B
=
Black
S
=
Industrial Silver
rev 050108
For use with 70W or 100W PAR38 Metal halide lamps.