Filter
Top Products
CUSTOMIZE THE DISPLAY page 2 of 2
Air Quality – Sets service reminders for parts of the heating/cooling system that need
periodic attention.
Based on the intervals you set, these service reminders are displayed on the main screen
when a part needs to be serviced:
Replace or Clean Filter
UV Filter: Replace Bulb
Replace or Clean Humidifier Pad
All service intervals can be set to OFF or for a period of 1-12 months.
When the main screen reminder appears, you can select either of
these choices:
Delay – This is a 24-hour delay. The reminder appears again in
one day.
Reset – This resets the service reminder. It will appear again at
the end of the interval that’s been set.
Display Settings – Changes screen brightness and contrast control.
Idle Brightness – Refers to backlight brightness. When turned ON, this feature can be used as
a night light.
Active Brightness – Refers to backlight brightness when any of the keys are being used.
Contrast – Refers to screen clarity.
20
User Preference Menu
Back
Select
Temp Offset 0.0°F
Resolution Tenths°
Air Quality
Display Setting
Replace Or Clean
Filter
Delay
Reset
110-1175 English 7/17/06 1:59 PM Page 20