Robertshaw 9801I2 Thermostat User Manual


 
16
DEHUMIDIFY
Choose Dehumidify from the Main Menu.
The three items available in this menu are explained below.
Mode choices are:
Off – Humidity level will not be controlled through the thermostat.
With Cooling – Dehumidification will occur only during a cooling cycle and when the indoor
humidity level rises 2% above the humidity setpoint.
Independent Of Cooling – Dehumidification will occur when the measured humidity level rises
2% above the humidity setpoint regardless of a call for cooling.
NOTE: If Mode is set to Independent of Cooling, Over Cooling will be an option on the
Dehumidify Menu.
Over Cooling – To achieve more dehumidification, the thermostat will allow cooling beyond the
temperature setpoint by the entered amount. Range 0.5°F to 2.0°F.
Dehumidify Above – This is where you set your preference of the humidity level. The range is
45% to 60%.
Add-on – Cycles the dehumidifier regardless of a call for cooling. In order to get full use of
this mode, it should only be selected when a duct mounted dehumidifier is installed.
NOTE: When dehumidification is active, the main screen will
include the icon next to the measured humidity.
Main Menu
Back
Select
Time & Day
Humidify
Dehumidify
Comfort Settings
Dehumidify Menu
Back
Select
Mode Off
Dehumidify Above 50%
Dehumidify Menu
Back
Select
Mode Independent...
Over Cooling 1.5°F
Dehumidify Above 50%
Mode
Menu
Set At 70
9:15
AM
Monday Jun 20
55%RH
68.9
Outside 42
°F
Select Dehumidify Mode
Cancel
Accept
With Cooling
Independent Of Cooling
Add-on
110-1175 English 7/17/06 1:59 PM Page 16