Filter
Top Products
Ridge Tool Company 13
Accessories
Only the following RIDGID products have been designed
to function with the K-40/K-40B Drain Cleaning Machines.
Other accessories suitable for use with other tools may be-
come hazardous when used on the K-40/K-40B. To pre-
vent serious injury, use only the accessories listed below.
Catalog
Number
Standard Machine Cable with Cable End Indicator:
C-13-IC SB Speedbump Cable..........
5
/
16
″ x 35′ 95847
Other Optional Cables:
C-1IC Cable with Bulb Auger .............
5
/
16
″ x 25′ 56782
C-2 Cable with Drop Head Auger ......
5
/
16
″ x 25′ 62235
C-2-IC Cable with Drop Head Auger..
5
/
16
″ x 25′ 56787
C-22 Cable with Drop Head Auger ....
5
/
16
″ x 50′ 89405
C-13-IC Cable with Bulb Auger..........
5
/
16
″ x 35′ 56792
C-23-IC Cable with Drop Head ..........
5
/
16
″ x 35′ 56797
C-4 Cable with Male Coupling.............
3
/
8
″ x 25′ 62245
C-5 Cable with Bulb Auger..................
3
/
8
″ x 35′ 62250
C-6 Cable with Male Coupling.............
3
/
8
″ x 35′ 62260
C-6-IC Cable with Male Coupling........
3
/
8
″ x 35′ 96037
Inner Drum 68917
Autofeed A-39/40 PF 67962
Guide Hose A-40G 71757
Guide Hose & Autofeed A-40G PF 71762
(See Figure 24.)
Mounting Bracket A-40B 72702
Torque Arm 71847
Automotive Battery Charger 84117
Top Roller Holder Housing Assembly 76597
C-6 Cable Kit 76817
C-6-IC Cable Kit Includes: 98072
C-6-IC Cable, Inner Drum, Torque Arm, T-250 Tool Set
14.4V Battery Pack 83407
115V Charger 83417
230V Charger 84112
Figure 24 – Guide Hose and Autofeed A-40G PF
Maintenance Instructions
WARNING
Make sure machine is unplugged from power
source before making any adjustment.
1. Cables should be thoroughly flushed with water after
each use to prevent damaging effects of drain clean-
ing compounds. RIDGID Cable Rust Inhibitor should
be applied prior to storage.
When not in use, store cables indoors to prevent de-
terioration by the elements.
NOTE! Cables should be replaced when they become
severely corroded or worn. A worn cable can
be identified when outside coils of cables be-
come flat.
2. Use a clean cloth to wipe the unit off. Oil, grease
and other substances may cause deterioration. Certain
cleaning agents and solvents damage plastic parts.
Some of these are: gasoline, carbon tetrachloride,
chlorinated cleaning solvents, ammonia and house-
hold detergents that contain ammonia. Avoiding use
of these and other types of cleaning agents mini-
mizes the probability of damage.
3. It is a good idea to regularly drain the inner drums of
any captured liquid. Simply hold the machine nose
down and drain excess liquid each time the machine
is used.
NOTE! Remove the Guide Hose accessory for ease of
draining.
4. Store the unit where it is cool and dry. Avoid those
areas where the temperature will drop to 0°F or ex-
ceed +120°F.
K-40 Drain Cleaner