Rheem G100-200(A) Water Heater User Manual


 
Power Vent Kits for Gas Commercial Water Heaters
Manufactured by Tjernlund Products,* Rheem-Ruud
commercial gas water heater power vent kits are your
best choice for new construction, electric-to-gas
conversions and renovations.
Construction Features:
• Certified for use on natural and propane gas
models.
• Maximum venting length up to 50 feet equivalent
including the vent terminal.
• Vent terminal can be installed through combustible
or non-combustible surfaces – heat shield is
provided.
• Vent terminal is constructed from heavy-duty
corrosion resistant aluminum.
• Venter can be connected to a vent termination
on an exterior wall.
• Vibration isolators are supplied to provide quiet
operation.
• Safety interlocks standard.
• Complete with mounting hardware.
• Venter is pre-wired with 40 feet of #18-4 copper
wire (24 volt) to minimize field connections.
Certifications and Ratings:
• Power vent kits manufactured by Tjernlund Products,
Inc. are tested and certified by AGA for use on
Rheem-Ruud commercial gas water heaters.
Continued on reverse.
Not for use with GN or GX models
Power Venter (from Tjernlund)
Vent Terminal
*For technical assistance, please call the Tjernlund Help Line at
1-800-255-4208