Rheem 110 Water Heater User Manual


 
Indirect Water Heaters
Available in 30, 38, 45, 75 and 110 Gallon Models
Rheem-Ruud’s indirect coil tank water heaters offer a cost effective water
heating alternative. These units use indirect water-to-water heat transfer by
circulating boiler-fed hot water through a coil inside the water tank. They’re
ideal for applications that use boilers for space heating.
Construction Features:
Built to last
tank is manufactured from heavy
gauge steel. Longer life equals a
higher “return on investment”.
Outer jacket is made from steel
and powder coated for a lasting,
durable finish.
High temperature porcelain
enamel protects all tank
and coil
and maximizes corrosion
resistance.
Factory installed automatic
temperature controls
immersion aquastat on all models.
Factory installed brass
drain valve
Sediment reduction inlet
standard on the STID80 and
STID120. Reduces sediment
buildup on the tank bottom
increasing operating efficiencies
and tank life.
Temperature and pressure
relief valve
CSA/ASME rated and factory
installed.
1-1/2" Coil diameter
larger diameter, results in higher
recovery and less pressure drop
through the coil smooth surface
on the coil resists lime build-up.
2" Non-CFC foam insulation
provides superior insulating quality
and decreases standby heat loss.
Two heavy-duty magnesium
anode rods
inhibit corrosion and maximize
tank life.
Factory installed
dielectric nipples
provide greater insulating
protection against electrolysis.
Continued on reverse.
Tested in accordance with GAMA Indirect-Fired Water Heating Standard
IWH-TS-1 March 2003.