Regency U32-NG5 Indoor Fireplace User Manual


  Open as PDF
of 2
 
U32 Regency Gas Insert
Model U32-NG5 U32-LP5
Fuel Type Natural Gas Propane
Minimum Supply Pressure 5” W.C. (1.25 kPa) 12” W.C. (2.99 kPa)
Manifold Pressure - High 3.8” W.C. (0.95 kPa) 11” W.C. (2.74 kPa)
Manifold Pressure - Low 1.1” W.C. (0.27 kPa) 2.9” W.C. (0.72 kPa)
Orifi ce Size -Altitude 0-4500 ft. #37 DMS #52 DMS
Minimum Input
Altitude 0-4500 ft. (0-1372m)
15,300 BTU/h
(4.48 kW)
15,000 BTU/h
(4.40 kW)
Maximum Input
Altitude 0-4500 ft. (0-1372m)
30,000 BTU/h
(8.79 kW)
30,000 BTU/h
(8.79 kW)
Vent Sizing 3” Co-linear 3” Co-linear
Minimum Fireplace Dimensions
The minimum fi replace dimensions for the FPI gas fi replace insert are
shown in the following diagrams:
A
C
B
D
E
F
G
I
H
L
M
J
K
N
Dimension Description
Contour
Faceplate
Molded
Faceplate
J Height 22” (559mm) 22” (559mm)
K Width 26-1/2” (673mm) 29” (737mm)
L Depth 14” (356mm) 15” (381mm)
M Max. Lintel Bar Depth 9” (229mm) 10” (254mm)
N Rear Width 22-1/2” (572mm) 22-1/2” (572mm)
Dimension Description U32
A Faceplate Width 40-1/4” (1022mm)
B Faceplate Height 26-1/4” (667mm)
C Unit Width 28” (711mm)
D Unit Height 20” (508mm)
E Unit Depth 13-3/4” (349mm)
F Faceplate to Vent Centerline 10-3/4” (273mm)
G Faceplate Depth 1-3/8” (35mm)
H Height to Vent Collar 21-1/16” (535mm)
I Optional or Standard Front Depth 3-3/4” (95mm)
U32 Regency Gas Insert
Approved Venting Systems
Flex Vent Systems: FPI AstroCap™ Flex Vent
125August 2008 Product Specifi cations Book
Gas Inserts
Gas Inserts