Filter
Top Products
18 Regency CLASSIC C34-2 Direct Vent Freestanding Gas Heater
You will require the following Dura-Vent vent-
ing components with your new CLASSIC Di-
rect Vent Freestanding Gas Stove. Please
review your product to make sure you have
everything you need. In the event that you are
missing any part, contact your dealer.
Note: These are the minimum compo-
nents required. Other parts may
be required for your particular in-
stallation. See page 11 for a vent-
ing components list.
If installing termination on a siding covered wall,
a vinyl siding standoff or furring strips can be
used in order to ensure that the termination is
not recessed into siding.
The vinyl siding standoff is required for walls
with vinyl siding.
Dura-Vent Basic
Horizontal Kit # 970
1 90
o
Elbow
1 Wall Thimble Cover
1 Horiz. Sq. Term. Cap
Alternate Horizontal
Termination Caps
Alternate Horizontal
Riser Vent Terminal
Part# 640-530/P
Minimum components for a Horizontal
Installation using Dura-Vent Compo-
nents:
A) Dura-Vent Horizontal Termination Kit #971
B) Wall Thimble #942 (required for combusti-
ble walls) (Canada Only)
Minimum components for a Vertical
Termination using Dura-Vent Compo-
nents:
D) Vertical Termination Kit # 978 See page 11
for pipe lengths).
Alternate Snorkel
Termination Cap
Part# 982 (14")
Part# 981 (36")
INSTALLATION
The Regency AstroCap
TM
is certified for installations using FPI venting systems as well as Simpson Dura-Vent® and Direct Vent GS.
Regency
TM
, and Regency AstroCap
TM
are the proprietary trademarks of FPI Fireplace Products International Ltd.
Dura-Vent® and Direct Vent GS are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.