Filter
Top Products
Catalog No.: 1000.70A Effective: 10-15-07 Replaces: 5-1-05
Job:
Engineer:
Contractor:
Prepared By: Date:
Versatile
• For use with pool and spa heaters
• Permits sidewall venting
• Allows use of vent pipe as small as 4 in.
diameter
Efficient
• Maintains thermal efficiency of 82% on all
heater sizes
Multi-Position Capability
• 90° elbow can be rotated to align fan
discharge with vent pipe and reduce the
number of fittings required
Features
Induced draft
Vent (Category III) runs up to 100 ft. equivalent length
Plenum sized for appliance capacity
Air flow proving switch, mounted and wired
Fan motor relay, mounted and wired
240/120 Volt, 60 Hz, 1.95/1.0 Amp, 130 CFM Max.,
3200 RPM motor; Factory-wired for 240 Volt
90° elbow is used as a termination cap for
horizontal venting
Heavy-duty galvanized steel cabinet
PolyTuf textured powder coat finish
Indoor/Outdoor construction
Easy installation
Limited one-year warranty
Shipped loose for field mounting
D-2 Power Vent
For Pool & Spa Heaters
Models 206-407