Paradyne 7800-D1-999 Network Card User Manual


  Open as PDF
of 11
 
1
OneVisiont
ACCULINK Access Controller Manager
for HP OpenView
Feature Number 7800-D1-999
Document Number 7800-A2-GZ50-10
January 1997
Overview
The OneVision ACCULINKr Access Controller (AAC) Manager supports the ACCULINK Access Controller
under HP OpenViewt. It provides the means to administer the AAC device, accept traps from it, and gather
performance data.
This feature document provides instructions on:
• How to prepare for and install the OneVision AAC Manager software on both HPr and Sunr workstations
• How to remove the installed software if necessary
• How to assist and/or accelerate the process of discovering AAC devices for the HP OpenView Map
• How to cut through to the AAC Terminal Interface
• How to upload or download configuration images from or to the AAC
• Which SNMP traps are generated by the AAC
This document assumes that you have a working knowledge of UNIXr and HP OpenView. If you are not familiar
with the general use of HP OpenView, refer to your HP OpenView documentation for a description of the user
interface.
Features
The AAC Manager provides the following features:
• Discovery and addition of AAC devices on a network map
• Cut-through from HP OpenView to the AAC for configuration, diagnostics, and device performance
evaluation
• AAC configuration image transfer allowing storage of AAC device options on HP OpenView for use in
disaster recovery
• Simple Network Management Protocol (SNMP) trap handling
TM
next