Filter
Top Products
157
(6-3/16˝)
367
(14-7/16˝)
350
(13-25/32˝)
314
(12-3/8˝)
75
(2-15/16˝)
104.5
(4-1/8˝)
105.5
(4-5/32˝)
29
(1-5/32˝)
87.5
Attachment plate
Projector
Attachment plate
180
(7-3/32˝)
261
(10-9/32˝)
(3-7/16˝)
175
(6-7/8˝)
220
(8-21/32˝)
Ø11 (7/16˝)
407.5 (16-1/32˝)
1
ET-PKD55S
Ceiling Mount Bracket for high ceilings
S P E C F I L E
Description
This ceiling mount bracket is to be used when mounting Panasonic projectors.
Specifications
Vertical correction angle: +5°, -17°
Horizontal slant correction angle: ±2.5°
Horizontal turn correction angle: ±1.2°
Dimensions (W x H x D): 367 x 104 x 407.5 mm
(14-7/16˝ x 4-1/8˝ x 16-1/32˝)
Weight: 5.9 kg (13.0 lbs)
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Attachment plate . . . . . . . . . . . . . . . . . . . .1
Angle adjustment . . . . . . . . . . . . . . . . . . .1
Projector mount bracket . . . . . . . . . . . . . .1
Safety fitting . . . . . . . . . . . . . . . . . . . . . . .2
Washer-fitted screws (M4 x 8) . . . . . . . . . .4
Washer-fitted screws (M6 x 12) . . . . . . . .30
Hanging bolts (M10 x 600) . . . . . . . . . . . . .4
Spring washer (M10) . . . . . . . . . . . . . . . . .8
Flat washer (M10) . . . . . . . . . . . . . . . . . .16
Hexagonal nuts (M10) . . . . . . . . . . . . . . .16
Caution:
Mounting should be done by a qualified technician. Make sure that the mounting (ceiling) area has sufficient
strength. Read the enclosed mounting instructions thoroughly before starting.
as of September 2004
Dimensions
unit: mm (inch)
(Dimensions given in inches are approximate.)
Note: This illustration is not drawn to scale.
Parts
The assembled ET-PKD55S with a
projector mounted
Attachment Plate