Panasonic ET-PKF100S Indoor Furnishings User Manual


 
S PEC F ILE
ET-PKF100S
Ceiling mount bracket
As of October 2008 < 1 >
Specifications Vertical correction angle: +5°, -15°
Horizontal slant correction angle: ±5°
Horizontal turn correction angle: ±5°
Dimensions (W x H x D): 435 x 210 x 245 mm (17-1/8˝ x 8-9/32˝ x 9-21/32˝)
Note: Height (H) include holding brackets.
Weight: 1.9 kg (4.2 lbs)
Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . . 1
Projector mount bracket . . . . . . . . . . . . . . . . . . 1
Holding bracket A . . . . . . . . . . . . . . . . . . . . . . 1
Holding bracket B . . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted screws (M4 x 12) . . . . . . . . . . . . 8
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Flat wire clip . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Weights and dimensions shown are approximate. Specifications subject to change without notice.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Description
This ceiling mount bracket is to be used when mounting LCD projectors to the low ceiling.
Caution:
Mounting should be done by a qualified technician.
Make sure that the mounting (ceiling) area has sufficient strength.
Read the enclosed mounting instructions thoroughly before starting.
When the product is no longer going to be used, have it disposed of quickly by a professional
disposal service.
Do not use an electric screwdriver or impact driver to tighten screws. (Use a torque driver or simi-
lar tool.)
10°
10°
15°
70
Attachement
plate
65 (2-9/16˝)
(2-3/4˝)
25
(31/32˝)
166.5
(6-9/16˝)
432
(17˝)
189
(7-7/16˝)
436 (17-5/32˝)
9.5 (3/8˝)
13 (1/2˝)*
3-Ø9.5 (3/8˝)
20 (2-9/16˝)
From center of
rotation to center
of lens
*
Ø8.5
(11/32˝)
150 (5-29/32˝)
160 (6-5/16˝)
153
(6-1/32˝)
210
(8-9/32˝)
140 (5-1/2˝)
114 (4-1/2˝)
130 (5-1/8˝)
104 (4-3/32˝)
Attachment plateIllustration shows the bracket attached to the
PT-F300NT/F300/FW300NT/FW300.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions