Filter
Top Products
Ceiling
Wall
Wall
Step 1 I Identify parts
Phillips Head Screw Driver
Pencil
Electric Drill
Drill Bits: 1/8'' drill bit for drywall
3/16'' masonry bit for cement wall applications
Step 3 Installation of wall plate
Mounting to drywall.
1. Use wall plate as a template and mark screw hole locations.
2. Drill into drywall with 1/4'' drill bit. Insert the anchors into hole, see fig. 3.
3. Secure with #8 x 1-3/4'' screws, see fig. 4.
Mounting to solid concrete or cinder block.
1. Drill into surface with 3/16'' masonry drill bit to 1-3/4" deep. Insert anchors into the holes, see fig. 3.
2. Secure wall plate with #8 x 1-3/4" screws, see fig. 4.
1/8''
3/16'' mason bit
Knurled side
Provided fasteners and tools
3/32''
Step 2
D Decide on location
Extension
Adjusting knuckle
Speaker plate
Mounting plate (1)
Screw covers
Mounting plate (2)
fig. 3
fig. 3
fig. 4
(1) (5) M4 X 10mm Phillips
pan head machine screw
(1) (5) M5 X 12mm Phillips pan
head machine screw
(2) (10) #8 X 3/4" Phillips pan
head self-tapping screw
(2) (10) #8 X 1-3/4'' Phillips pan
head self-tapping screw
(1) (5) 5/64'' Hex key
(2) (10) plastic anchor
(1) (5) 8-32 X 1/2'' Phillips pan
head machine screw
(1) (5) Circular nut (PEM)
8-32 thread
(1) (5) 1/4-20 X 1" Phillips pan
head machine screw
(1) (2) 3/32'' Drill bit
(1) (5) 1/4-20 Threaded
Keyhole adapter plug
fig. 4
AB1/AB1 HTS INSTALLATION INSTRUCTIONS
fig. 2
1 3/4"
fig. 2
1 3/4"
AB1 HTS
AB1 HTS
Additional installation tools