Omega Engineering LVCN-302 Water Pump User Manual


  Open as PDF
of 7
 
Displaying Your Tank’s Cross-Section
Security Levels / Select and Enter Data
Initial Set-Up / Eight Simple Steps
Sensor Connections / Schematics
Sending a 4-20 mA Signal to Other Devices
LVCN-302
Set-Up Manual for Sump Model
M3760/1201
MADE IN
User’s
Guide
Specifications:
Sensor Input: Isolated input accepts any type of 4-20 mA process signal. Loop power available up to
24VDC for 2 wire device
Input Power: 120VAC/900 mA; 24VDC unregulated/450 mA
Security Levels: 3 levels of access protect data changes with DIP switch on back
Control Circuits: Four Form C relays, 10.0 amp 125VAC (noninductive)
Switching Mode: Selectable, NO or NC states
Output & Input Connections: Terminal Connections are plug in Phoenix type
Programmed Memory: EEPROM - Loss of power will not affect existing programmed data
Mounting Format: Flush mounted anodized steel enclosure with eight (8) 10/32 studs and sealing
gasket; NEMA 4 graphic front panel; steel back pan housing.
Overall Dimensions: Tall: 16.75” (425 mm), Wide: 10.25” (250mm), Deep 2.25” (57mm),
Weight: 4.5 kg (10 lbs.)
LVCN-302 is a solid-state controller with a variety of unique control and display features. It’s designed to
simply present the crucial information, at a glance. It’s built to perform in all types of harsh industrial
environments as well as control alarms, pumps, solenoids, etc.
Topics covered in this manual
omega.com
®
®
™
®
next