Filter
Top Products
1
THIS PACKAGE INCLUDES:
• Wireless Door Chime - requires 3
“D” alkaline batteries (not inlcuded)
• Wireless Door Chime Pushbutton
& 12-volt alkaline battery
• Mounting Hardware
FEATURES
• Battery powered chime and trans-
mitter - no wires to run
• Adjustable volume control
• 125-foot open air operating range
• 64 frequency channels to minimize
interference from other devices
• Optional NuTone wireless push-
buttons available for multiple doors
(side, rear, etc.)
WIRELESS DOOR CHIME
INSTALLATION
PUSH
BUTTON
BATTERY
{
DOOR SET
JUMPERS
INSTALLATION INSTRUCTIONS
READ & SAVE THESE INSTRUCTIONS
-
+
-
+
-
+
FRONT
CASE
NOTCH
BACK
PLATE
2. Install pushbutton battery.
Open the pushbutton case and install
the 12V alkaline battery (included).
To open pushbutton case: Insert a
at-blade screwdriver into the notch
on the bottom and push to open. Lift
the front case up and away from the
back plate.
3. Select chime melody.
Use the door set jumpers on the
pushbutton(s) to change the chime
melody.
Tip: Multiple pushbuttons can be set
to ring a different melody for each
door (up to three melodies).
Put jumpers on pins y and x for
Westminster chime.
Put jumpers on pins y and * for 2-
note “ding-dong”.
Put jumpers on pins x and * for 1-
note “ding”.
1. Install chime batteries.
Remove the back of the chime case
and install three 1.5V alkaline, size
“D” batteries (not included). Replace
back case.