NuTone 754RBNT Indoor Furnishings User Manual


 
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-888-543-8687)
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
60K 99043980A
DESCRIPTION
LIGHT FIXTURE:
Corrosion resistant finish
Oil-rubbed bronze finish (Model 754RBNT)
Satin nickel finish (Model 754SNNT)
Frosted glass shade
Close mount design
Uses two 60 Watt maximum, candelabra base bulbs.
Bulbs not included.
Vent openings in fixture base for exhaust fan
Light fixture assembly is plug-in and removable
BLOWER:
Plug-in permanently lubricated motor
Polymeric blower wheel
HOUSING:
Rugged, 26-gage galvanized steel construction
Sturdy key-holed mounting brackets for quick, accurate
installation
Tapered, polymeric duct fitting with built-in backdraft
damper for easy, positive duct connection and no metallic
clatter
NOTE: For installation in flat ceilings only.
U.L. Listed for use in insulated ceilings (Type I.C.)
Use supply wiring rated for at least 90° C
SPECIFICATIONS
VOLTS AMPS CFM SONES DUCT
120 2.2 70 3.5 4" Round
INSTALLATION
Complete installation instructions are included with each
Decorative Light / Fan.
ARCHITECT'S SPECIFICATION
Decorative Light/Fan unit shall be NuTone Model 754RBNT
(754SNNT).
Unit shall have galvanized steel housing with dual integral
mounting brackets. It shall be ducted to a roof or wall cap.
Blower assembly shall be removable and have a permanently
lubricated motor.
Light fixture assembly shall be plug-in, removable and include a
frosted glass shade and a corrosion-resistant base with oil-
rubbed bronze finish (Model 754RB) or satin nickel finish (Model
754SN).
Lamps shall be two 60 Watt maximum, candelabra base,
incandescent.
Air delivery to be no less than 70 cfm and sound level no greater
than 3.5 sones. Air and sound ratings shall be certified by HVI.
Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.)
Architectural & Engineering Specifications
October 2006
Decorative
Light / Fan
MODELS 754RBNT & 754SNNT
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed by
the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers.
Product performance is rated at 0.1 in. static
pressure, based on tests conducted in AMCA’s
state-of-the-art test laboratory. Sones are a
measure of humanly-perceived loudness, based
on laboratory measurements.