15
65D1009
EYF Series Unvented Gas Log Set
WARNING
WARNING
— This unit is supplied with a four
ceramic fiber log units. Do not handle the log unit with
your bare hands.
After handling the log unit,
wash your hands gently with soap and water to remove
any traces of fibers.
Figure 18
1. Install Main Log (#1) on middle and rear supports of
base. Tabs should fit inside log center opening. Check
log position and stability.
. Install Front Log (#) in front of burner and behind
grate.
3. Rest rear end Top Left Log (#3) in the indention on the
main log. Line up hole in bottom of Top Left Log (#3)
with slot on Front Log.
4. Position rear end of Top Right Log (#4) on indention of
main log. Rest front end of Top Right Log (#4) on front
lot.
LG706
EYF24-F logs
Top Left Log
#3
Top Right
Log #4
Main Log
#1
Front Log
#
Tabs
Grate Bars
LG706
Figure 18 -
EYF24-F Log Placement