Filter
Top Products
Glass Shelf with Pivoting Rail
is
constructed of zinc posts and rail.
Shelf is tempered glass.
q
YB98
99
CH
–
Glass Shelf with
Pivoting Rail
Chrome Finish
q YB9899BN – Glass Shelf with
Pivoting Rail
Brushed Nickel Finish
q YB9899WR – Glass Shelf with
Pivoting Rail
Wrought Iron Finish
Cleaning Instructions:
25300 AL MOEN DRIVE
•
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321-8809 • FAX: (800) 848-6636
INTERNATIONAL: (440) 962-2000 • FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: (888) 379-2720
Copyright Creative Specialties International 2004 Literature #BA1190
1.
Position the mounting te
mplate on the wall in the desired location. Using a
level, align the template and tape it to the wall.
2. Remove each mounting post from the body by loosening the setscrew.
3. Place each mounting post on the template with notch facing down.
4. One at a time, place each anchor screw through the mounting post, centered
in the hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall.
5. Only insert screw ½ to ¾ into wall.
6. After all screws are installed, tear the template away from the wall.
7. Tighten all 4 screws. Do not over tighten.
8. Place skirt over each mounting post.
9. Assemble glass to each post by removing the pivoting rail. Loosen both
setscrews below rail with the provided hex wrench. Re-assemble with glass
shelf between both washers and finish by screwing the pivoting rail back
on, by tightening the setscrews.
Stock Number:
___________
Glass Shelf
w/ Pivoting Rail
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Glass Shelf w/ Pivoting Rail
YB9899
Waterhill™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.