Moen S948 Plumbing Product User Manual


  Open as PDF
of 1
 
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
Rev. 6/08
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
1-11/32"
(34mm)
6-9/16"
(167mm)
ESCUTCHEON DIA.
1-7/8"
(47mm)
ESCUTCHEON DIA.
2-3/8"
(60mm)
QUICK CONNECT
HOSE ASSEMBLY
2-1/4” (57mm) MAX.
DECK THICKNESS
3-5/8"
(92mm)
3-5/8"
(92mm)
LIFT ROD
6-3/8"
(162mm)
7-5/8"
(193mm)
8" (203mm) - 16" (406mm)
Centers
2-13/16"
(72mm)
DESCRIPTION
- Metal construction with various finishes identified by suffix
- 1/2" IPS connections will accept standard ball nose connection for 3/8”tubing
- Hydrolock™ quick connect installation
- Includes metal pop-up waste assembly
- For use with S948 valve
- Designed to be installed through 3, 1-1/8”dia. holes
OPERATION
- Lever style handles
- Maximum handle rotation angle is 90˚ to full on for either handle
- Rotate hot side handle counterclockwise to open and clockwise to close
- Rotate cold side handle clockwise to open and counterclockwise to close
FLOW
- Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max. (8.3 L/min)
- Features a laminar flow pattern for dramatic water presentation
CARTRIDGE
- 1224 cartridge design with nonmetallic/nonferrous
and stainless steel materials
STANDARDS
- Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1, ICC A117.1
and all applicable requirements referenced therein
- Certified to ANSI/NSF 61/9
- Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
-
ADA
for lever handles
WARRANTY
- Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
- 5 year warranty if used in commercial installations
FELICITY™
Two-Handle Widespread
Lavatory Faucet Trim
Models: TS448 series
Valve: S948