Filter
Top Products
CRITIC
AL DIMENSIONS
(DO NOT SCALE)
Specifications
Rev. 6/08
9-3/4"
(247mm)
2-1/4” (57mm) MAX.
DECK THICKNESS
10-1/2”
(260mm)
6”
(152mm)
7”
(178mm)
2-1/2” min. (77mm)
for lift rod operation
Back
Splash
SPOUT BASE
1.969" (50mm)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
- Metal construction with various finishes identified by suffix
- 30" flexible supply lines with 3/8" fittings intended to connect
directly to supply stops
- Includes metal pop-up waste assembly
- Designed to be installed through 1, 1-1/8"min. dia. hole
OPERATION
- Cross handles
- Maximum handle rotation angle is 90˚ to full on for either handle
- Rotate hot side handle counterclockwise to open and clockwise to close
- Rotate cold side handle clockwise to open and counterclockwise to close
FLOW
- Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max. (8.3 L/min)
- Features a laminar flow pattern for dramatic water presentation
CARTRIDGE
- 1224 cartridge design with nonmetallic/nonferrous
and stainless steel materials
STANDARDS
- Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1, ICC A117.1
and all applicable requirements referenced therein
- Certified to ANSI/NSF 61/9
- Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
- Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
- 5 year warranty if used in commercial installations
SOLACE™
Two-Handle Single Mount
Lavatory Faucet
Models: S4711 series