Moen S452 series Plumbing Product User Manual


  Open as PDF
of 1
 
Specifications
Rev. 6/08
MOUNTING
NUT/WASHER
HOT
1/2" NPT
COLD
1/2" NPT
LIFT ROD
3/4" (19mm) MAX.
DECK THICKNESS
2-15/16”
(74mm)
4-5/16”
(110mm)
ESCUTCHEON
2-3/8” x 6-3/8”
(60mm x 162mm)
3-5/8”
(92mm)
4-11/16”
(120mm)
4-7/8”
(124mm)
4”
(102mm)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
- Metal construction with various finishes identified by suffix
- 1/2” IPS connections will accept standard ball nose connection for 3/8” tubing
- Optional hot and cold temperature indicators available
- Includes metal pop-up waste assembly
- Designed to be installed through 3, 1” min. dia. holes
OPERATION
- Lever style handles
- Maximum handle rotation angle is 90° to full on for either handle
- Rotate hot side handle counterclockwise to open and clockwise to close
- Rotate cold side handle clockwise to open and counterclockwise to close
FLOW
- Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max. (8.3 L/min)
CARTRIDGE
- 1224 cartridge design
- Nonmetallic/nonferrous and stainless steel materials
STANDARDS
- Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
- Certified to ANSI/NSF 61/9
- Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
-
ADA
for lever handles
WARRANTY
- Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
- 5 year warranty if used in commercial installations
DIVINE™
Two-Handle Lavatory Faucet
Models: S452 series
CRITICAL DIMENSIONS
(DO NOT SCALE)