Moen 3285P* Plumbing Product User Manual


 
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
DESCRIPTION
Metal construction with a chrome plated or
decorative polished brass finish
Single handle, pressure balancing, four port,
cycle valve with integral check stops and adjustable
temperature limit stop
Includes showerhead, arm, flange, and tub filler spout
1/2" CC connections
OPERATION
Knob style handle, Pull-on push-off design
Temperature operates through an 180° arc
of handle travel (full cold to full hot)
Adjustable temperature limit stop to control
maximum hot water temperature
Pressure balancing mechanism maintains selected
discharge temperature to ± 3°.
FLOW
Showerhead is limited to 2.5 gpm (9.5 L/min) Max
CARTRIDGE
1225 cartridge design
Accommodates back to back installations
Nonmetallic/nonferrous and stainless steel material
STANDARDS
Third party certified to meet CSA B-125, ASSE 1016,
ASME A112.18.1M, and all applicable requirements
referenced therein
WARRANTY
Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
5 year warranty if used in commercial installations
LEGEND
®
MOENTROL
®
Single-Handle Tub/Shower Valve
Models: 3285, 3285P*
*Discontinued 2/1/97
7" (178mm)
ESCUTCHEON
DIAMETER
HOT
INLET
COLD
INLET
FINISHED WALL LINE
KNOB
HANDLE
5-1/2"
(140mm)
WALL
OPENING
ESCUTCHEON
FLOOR
L
C
7-1/2" MIN.
(191mm)
H/A/F
TUB
FILLER
4-1/2"
(114mm)
TUB RIM
H
C
HC
6'-6"
(1981mm)
32" (813mm) - TUB OR
TUB SHOWER
45" (1143mm)/
48" (1219mm) - SHOWER
2-9/16" (65mm) MAX.
1-15/16" (49mm) MIN.
1-1/4" (32mm)
Rev. 8/05