Moen 2348P Plumbing Product User Manual


 
Specifications
®
CRITICAL DIMENSIONS
(DO NOT SCALE)
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
T/S-43
DESCRIPTION
Metal construction with a chrome plated, LifeShine
®
polished brass or glacier finish
Pressure balancing cycle valve design with an
adjustable temperature limit stop
1/2" IPS connections
Includes adjustable showerhead, arm,
flange and diverter tub spout
OPERATION
Handle operates counterclockwise through a 270°
arc with off at 6 o’clock and maximum hot at the 9
o’clock position. Shut off in clockwise direction
Adjustable temperature limit stop to control
maximum hot water temperature
Pressure balancing mechanism maintains selected
discharge temperature to ± 2°
FLOW
Showerhead is limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
1222 cartridge design
Nonmetallic/nonferrous and stainless steel materials
Accommodates back to back installations
STANDARDS
Third party certified by CSA to meet CSA B-125,
ASME A112.18.1M and all applicable requirements
referenced therein and complies with the applicable
requirements of ANSI A117.1
WARRANTY
Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
5 year warranty if used in commercial installations
MONTICELLO
®
POSI-TEMP
®
Single-Handle Tub/Shower Valve
Models: 2348, 2348CP,
2348P, 2348W
NOTE: See reverse side for illustrated
parts and optional handle inserts
7" (178mm)
ESCUTCHEON
DIAMETER
HOT
INLET
COLD
INLET
FINISHED WALL LINE
4-1/2" (114mm)
WALL OPENING
FLOOR
45" (1143mm)/
48" (1219mm)-SHOWER
32" (813mm)-TUB OR
TUB SHOWER
1-11/16"
(43mm)
7-1/2"
(191mm)
MIN.
TUB RIM
6'-6"
(1981mm)
L
C
FLOOR LINE
L
C
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
PLASTIC
TUB/SHOWER
SURROUND
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
FACE OF STUD
1 3/8"
(35mm)
2 1/2" MAX. (63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
1 3/8"
(35mm)
1 1/2"
(38mm)
3/16" (typ) (5mm)
THIN WALL APPLICATION
THICK WALL APPLICATION
ADA symbol applies to shower
valve control only.
Rev. 11/98
ADA