Moen 22245 Plumbing Product User Manual


  Open as PDF
of 1
 
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
w
w
w
.moen.c
om
Rev. 4/05
S
INK DESCRIPTION
• M
anufactured of 20 gauge, type 301
nickel-bearing stainless steel
• The large bowl is a minimum of 12" x 190" x 5-1/2"
• The sink ledge has two fixture mounting holes,
1-11/32" in diameter and 4" on center
• Includes 4901 bar faucet with a 2.2 GPM flow rate
• Has one 2” diameter SEALTITE recessed drain
• Soundshield undercoating maximizes sound
deadening and inhibits condensation
• The exposed surfaces are polished to a lustrous satin
tone finish
• Includes all necessary mounting hardware
CUT OUT DIMENSIONS
• Cut out dimensions are 12-1/2" x 16-5/8", with a
3/4" corner radius. A tolerance of plus or minus
1/16" is acceptable
STANDARDS
• Third party certified by IAPMO to meet ASME A112.19.3
and all applicable specifications referenced therein.
Also meets applicable requirements of ANSI A117.1
WARRANTY
• Warranted for ten years against material or
manufacturing defects
Camelot
®
Single Bowl Bar Sink
Model:
22245
(K-1317-2-WF)
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
SINK
CLAMP
COUNTERTOP
SEALANT MATERIAL
6"
(152mm)
2-5/8" R.
TYP.
2"
(51mm)
1-11/32" DIA. TYP.
13"
(330mm)
WIDTH
5"
(127mm)
10"(254mm)
BOWL
5-1/2"
(165mm)
17-1/8"
(435mm)
LENGTH
1-1/2"
(38mm)
1-1/2"
(38mm)
1-1/2"
(38mm)
SEALTITE DRAIN
ASSEMBLY WITH
DROP IN BASKET
3-5/8"
(92mm)
12"
(304mm)
2"SEALTITE
DRAIN
3/4" R.
TYP.
Installation Detail
ADA