Moen 22241 Plumbing Product User Manual


 
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
w
w
w
.moen.c
om
SINK DESCRIPTION
Manufactured of 20 gauge, type 301 nickel-bearing
stainless steel
The large bowl is a minimum of 12" wide by 10"
and is 5-1/2" deep
The sink ledge has two fixture mounting holes,
1-11/32" in diameter and 4" on center
Has one 2" diameter SEALTITE recessed drain with
drop on basket
Soundshield undercoating maximizes sound deadening
and inhibits condensation
The exposed surfaces are polished to a lustrous
satin tone finish with a satin band
Includes all necessary mounting hardware
CUT OUT DIMENSIONS
Cut out dimensions are 14-3/8" x 14-3/8" with a
3/8" corner radius. A tolerance of plus or minus
1/16" is acceptable
STANDARDS
Designed and manufactured to comply with the
requirements of: ASME A112.19.3M and all requirements
referenced therein
WARRANTY
Warranted for ten years against material or
manufacturing defects
Installation Detail
SINK OVERALL DIMENSION
C
OUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"
U" CHANNEL
SINK
CLAMP
C
OUNTERTOP
S
EALANT MATERIAL
5-1/2"
(140mm)
BOWL
DEPTH
12"
(305mm)
1-1/2"
(38mm)
1-1/2"
(38mm)
1-1/2"
(38mm)
SEALTITE
DRAIN
ASSEMBLY
7-1/2"
(191mm)
2-5/8" R. TYP.
2"(51mm)
TYP
1-11/32"
DIA. TYP.
15" (381mm)
8-1/2"
(216mm)
10"
(254mm)
BOWL
3-1/2"
(89mm)
11"
(279mm)
3/8" (10mm)
R TYP.
15"
(381mm)
WIDTH
Camelot
®
Single Bowl Bar Sink
Model:
22241
(K-1515-2)
Rev. 4/05