Filter
Top Products
PEFY-16
PEFY-P-NMSU-E/PEFY-P-NMAU-E/PEFY-P-NMHU-E (June 2010)
PEFY-P-NMSU-E
PEFY-P-NMAU-E
PEFY-P-NMHU-E
IU - A - 9
2. EXTERNAL DIMENSIONS
DATA U3
PEFY-P-NMLU-E/PEFY-P-NMHU-E
4-14X30(9/16X3/16) Slot
Air inlet
Air outlet
Keep duct-work length 850mm(33-15/32 in.) or more.
mm(in.)
When installing the drain pump kit (option).
(3-3/32)
(4-1/32)
(13/32)
(1)
(3-3/4)
(6-15/32)
(1-3/4)
(13/16)
(4-5/32)
(19/32)
(1-31/32)
(3-15/16)
(53-5/32)
(31-1/2)
(5-29/32~7-7/8)
(7-7/8~11-13/16)
(17-23/32)
(17-23/32)
(1-31/32)
(1-31/32)
(28-3/4)
( )
800
Drain hose
I.D.32mm (1-1/4inch)
<flexible joint >
(accessory)
PEFY-P72NMHU-E
PEFY-P96NMHU-E
3
Required space for service and maintenance.
Note2
Access door
450
200~300
450
730
1350
50
50
150~200
Drain hole
(option)
Control box
Access door
Drain hole
Model
Suspension bolt hole
Terminal bed
(Transmission)
Terminal bed
(Power source)
Make the access door at the appointed position properly for service maintenance.
Ceiling surface
Note1.Use M10 screw for the Suspension bolt (field supply).
2.Keep the service space for the maintenance from the bottom
when the heat exchanger is cleaned.
3.Make sure to install the air filter(field supply)
on the air intake side.
In case field supplied air filter is used, attach it where
the filter service is easily done.
4.On this model, you would use pipe
packed with the Indoor Unit, when connecting
the Outdoor Unit for R22.
50(1-31/32)
(1-3/16)
50(1-31/32)
50 (1-31/32)
550(21-21/32) Max
222(8-3/4)
(1-31/32X7=13-25/32)
(1-31/32X6=11-13/16)
300(11-13/16) or less
78
1100(43-5/16)
340(13-13/32)
60(2-3/8)1034(40-23/32)(Suspension bolt pitch)
1124(44-9/32)
420(16-9/16)
110(43-5/16)
1372(54-1/32)
1326(52-7/32)(Suspension bolt pitch)23(29/32)
249(9-13/16)95
422(16-5/8)
489(19-9/32)
41(1-5/8)
20
164 44
105 340(13-13/32)
470(18-17/32)
29(1-5/32)
15(19/32)
1067(42-1/32)
10(13/32)
1120(44-1/8)
20(13/16)
35(1-13/32)
420(16-9/16)
100
15
50 50X20=1000(1-31/32X20=39-3/8)
102 25 50X21=1050(1-31/32X21=41-11/32)
1250(49-7/32)
30
327(12-7/8)
50X7=350
50X6=300
20(13/16) or more
20(13/16) or more
10
24(31/32)
PEFY-P72,96NMHU-E
Drw. : IU-W277665
Unit : mm(in)
2. EXTERNAL DIMENSIONS