Filter
Top Products
1. SPECIFICATIONS OF MOTION SYSTEM COMPONENTS
1
−
31
(c) Extension base unit (A1S65B, A1S68B)
A1S68B
5) 2) 4)
6)1) 3)
*1
No. Name Application
1)
Extension cable
connector
Connects to the signal communications connector on the main base unit with the
extension cable. Remove the connector cover before connecting the extension cable.
2) Base cover
A cover for protecting the extension cable connector.
3) Module connector
Connectors to mount the power supply module, I/O modules, and special-function
modules.
Install the supplied connector cover or blank cover (A1SG60) to prevent dust
penetrating empty connector spaces.
4) Unit fixing screw
Screws to fix the unit to the base.
Screw size M4
12.
5) Base mounting hole
Slots for mounting the base unit onto the control board panel (for M5 screws)
6) DIN rail hooks
Hooks to attach to the DIN rail.
A1S65B, A1S68B ......2
CAUTION
*1 : Install the supplied blind cap or blank cover (A1SG60) to prevent dust penetrating the empty
connector spaces. Failure to do so can cause malfunctioning.