Filter
Top Products
– 4 –
A) HANDLE ASSEMBLY
1) Align the handle with the
body of the cleaner as shown
in the illustration.
3) Place the hose under the
hose clip. Push in to secure.
NOTE: Always store the
hose in the clockwise
direction.
HOW TO ASSEMBLE / OPERATE YOUR CLEANER
B) POWER CORD RELEASE / STORAGE
1) Turn the upper cord hook to the upright position
and wind the power cord around the upper and lower
cord hooks.
1) To release the power cord, turn the upper hook.
Then set the power cord into the cord clip to help
secure it during use.
NOTE: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet in only one way. If the plug does not fit in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in
any way.
To avoid any possible damage to the power cord, never run over the cord or allow it to become caught in the
beater bar.
Hose clip
2) Insert the base of the handle into
the top of the body of the machine.
Push in handle and tighten the screw.
The screw can be found in the
bag with these operating instructions.
IMPORTANT: Do not over tighten
the screw.
Lower
cord hook
Upper
cord hook
Cord clip